Pulp & Paper

Enzyme tower

Ceramic Tile lining with epoxy over a coat of Primer Aroon 20 (Caustic Temp 30 to 35 PH 11 to 12)

Chlorine Tower

Two layers of F.R.P. Lining in ROSCO-Polister . Two layers of Ceramic Tile lining in ROSCO-Polister

(Caustic Temp Ambient PH 1 to 10)

Chlorine Di-Oxide Tower

Two layers of F.R.P. Lining in ROSCO-vinyl-1100 S . Two layers of Ceramic tile lining in ROSCO-Vinyl-1100 S

(Caustic Temp 30 to 35°C PH 1 to 12)

Hypotower / High density Tower

Ceramic Tile lining in ROSCO-Epoxy Cement over a coat of primer (Calcium Hyp A Temp 30 to 40°C PH 6.5 to 7.5)

Pulp/Bleaching Chests

Ceramic Tile lining in Cement/ Sand Mortar/Pointing - ROSCO-Epoxy Cement (Caustic Temp 30 to 40°C PH less than 11)

White water tank/ Foam Breaker tank

Ceramic Tile lining in Cement/ Sand Mortar/Pointing ROSCO-Epoxy Cement [Caustic 35 to 40°C PH 4 to 5]

Floor/Foundation below Paper machine

Ceramic Tile lining in ROSCO-Epoxy Cement over a coat of primer

Vats

Ceramic Tile lining in ROSCO-EPOXY CEMENT over a coat of primer [Caustic 60°C to 70°C PH Less than 10]

Deminalarised Water treatment Plant

A.R. Tile Lining in ROSCO-SKT / ROSCO-Furane R over mastic membrane - ROSCO-primer / ROSCO-compound

Effluent Treatment Plant

A.R. Tile Lining in ROSCO-SKT / ROSCO-FURANE R over mastic membrane - ROSCO-PRIMER / ROSCO-C OMPOUND

Chlorination Plant - Floors

5 mm thick Monolithic Epoxy Screeding over a coat of primer and two seal coats ROSCO-EPOXY CEMENT

ANTI CORROSIVE COATINGS
Structures, Tanks Vessels, Pipelines, Utility Pipelines, Chimneys, Conveyor Belt & Structures,
Roof/Shades, Utilities etc